Type G:/ and Hit Enter (You will enter into drive G) Type DIR (HIT Enter) - This will show the list of directories in HDD. Now Run the Command. attrib -r -s -h /s /d. the above command will take a while to execute, depending on the number of files and directories. Now try to format the drive in any way, command or GUI. Step 2 Launch Disk Management utility. To format Xbox 360 hard drive, we will use a free Windows utility called Disk Management. Open the start menu, right-click on My PC,and then select Manage. This will open a new window. Under the Computer Management tab, select storage and further choose Disk Management. 3. Double click WriteProtect and change Value data from 1 to 0; then, click OK. Fix 2. Clean WD hard drive and create new partition. If WD external hard drive won’t format problem is not related to write protection, you can clean it and create new partition. Here are detailed steps: You'll need to determine why your drive isn't recognized. It's possible you have a hardware issue, driver problem, or a dead drive. 3. Try Another USB Port and Computer. The reason your external drive isn't detected may not lie with your device, but rather with the port you're using to connect it to your computer. Found this: EaseUS Partition Master Free Edition Though the free edition can install a lot of bloatware (but you can opt not to), it did the trick: it could remove the MBR partition, create a new GPT partition and after that format it quite quickly. The format was done outside Windows during reboot sequence, it took less than 10 minutes. Vay Tiền Nhanh Ggads.

internal hard drive won t format